## What are “Compensation Controls”?

These are configurations that admins can set up to enforce controls on “Review” actions for employees based on column values, often referred to as **hard and soft stops or hard and soft flags.**

**Here are some use-cases that can easily be solved with the use of Compensation Controls!**

* Ex. A - Want to prevent a manager from entering a Salary Raise more than a 15% increase?
* Ex. B - Want to require a manager to provide justification for an increase over 7%?
* Ex. C - Want to ensure employees in New York get at least a 4% increase but employees in San Francisco get at least a 3% increase?
* Ex. D - Want to prevent managers from entering in equity for employees not eligible for that increase?

Ex. A.

 ![Untitled__78_.png](https://trytrove.file.force.com/servlet/rtaImage?eid=ka0TV0000001gWf&feoid=00NUn00000C06g9&refid=0EMTV00000EndwE)

If employee adjustments go outside of the configured bounds, the Compensation Planning product can apply and enforce limits on the worksheet submission or “Review” actions.

Now, admins are able to quickly and easily set flexible constraints around the compensation changes that planners can make, to drive more equitable outcomes at their organization and reduce manual overhead towards the end of the cycle.

Admins no longer need to go in and “correct” employee comp changes that fall well outside company accepted bounds (whether that is in terms of budget, recommendations, or bands), saving hours of manual work.

Companies are actually able to enforce compensation rules across all levels of the organization, leading to better adherence to equitable compensation outcomes (via hard stops).

Similarly, companies are able to track and reference reasons for significant deviation from expectations for compensation adjustments better into the future because planners can now be forced to submit reasons for those changes (via soft stops).

### Hard Stops

A **hard stop** is the equivalent of **preventing a planner from submitting certain adjustments that are outside of the configured range.**

For example, planners are not allowed to go above band max for a set of employees.

### Soft Stops

A **soft stop** is the equivalent of **requiring a justification reason from a planner when submitting adjustments outside of an acceptable range.**

For example, planners must submit a justification reason if they try and save a compensation change that puts an employee at greater than the recommended increase.

## Setting up Compensation Controls

### Add Compensation Control Actions to Employee Groups

To set up a Compensation Control, an admin must first set up an Employee Group that identifies which employees the control should apply to. See [Employee Groups](https://support.pave.com/hc/en-us/articles/14720203167639) for more information about how to create Employee Groups.


1. From the Compensation Planner, select the cycle you are planning, click **Configurations** in the top right corner. Then click **Employee Groups**. ![Screenshot_2024-08-26_at_7_41_33 AM.jpg](https://trytrove.file.force.com/servlet/rtaImage?eid=ka0TV0000001gWf&feoid=00NUn00000C06g9&refid=0EMTV00000EnkG9) 
    ![comp planner-employee group2.jpg](https://trytrove.file.force.com/servlet/rtaImage?eid=ka0TV0000001gWf&feoid=00NUn00000C06g9&refid=0EMTV00000EnkHl) 
2. Select an Employee Group from the side panel of the **Employee Groups** tab (or create a new group).

    ![comp planner-employee group3.jpg](https://trytrove.file.force.com/servlet/rtaImage?eid=ka0TV0000001gWf&feoid=00NUn00000C06g9&refid=0EMTV00000EnkJN)
3. Add a **Compensation Control** action to the group after the filters for the group match the desired criteria.

    ![cp-_empoyee2.jpg](https://trytrove.file.force.com/servlet/rtaImage?eid=ka0TV0000001gWf&feoid=00NUn00000C06g9&refid=0EMTV00000EnkKz)
4. Preview the popup that planners see if they trigger a Compensation Control.

    ![cp-_empoyee3.jpg](https://trytrove.file.force.com/servlet/rtaImage?eid=ka0TV0000001gWf&feoid=00NUn00000C06g9&refid=0EMTV00000EnkMb)

 

Please review [Compensation Controls in Action](https://support.pave.com/knowledge/editor/01HWB8BTVC0ASME7S3H9F7Q0DW/en-us?brand_id=1500002176702) for compensation control use cases.

You can view the Compensation Controls FAQ [here](https://support.pave.com/knowledge/editor/01HWB7YZ6JB8Z8PXM5HDVAEW7N/en-us?brand_id=1500002176702).

## What a Planner Sees

### For Hard Stops

Assume a compensation control is set up with the following conditions:

 ![cp-_employee4.jpg](https://trytrove.file.force.com/servlet/rtaImage?eid=ka0TV0000001gWf&feoid=00NUn00000C06g9&refid=0EMTV00000EniSs)

Hard stop for all employees with a Compa Ratio less than 0.9 or greater than 1.1

The planner will not be able to submit their proposed compensation change since the New Compa Ratio is below the threshold set of 0.9. They will see a dialog that explains each reason that they are blocked from submitting.

 ![Screenshot_2024-08-27_at_6_19_13 AM.jpg](https://trytrove.file.force.com/servlet/rtaImage?eid=ka0TV0000001gWf&feoid=00NUn00000C06g9&refid=0EMTV00000EnjiI)

If a planner tries to bulk save/review then they will see each employee and each reason that blocks them from doing so. They can then quickly find these employees and resolve them.

 ![Screenshot 2024-08-27 at 6.18.58 AM.png](https://trytrove.file.force.com/servlet/rtaImage?eid=ka0TV0000001gWf&feoid=00NUn00000C06g9&refid=0EMTV00000EnkRR)

### For Soft Stops

Assume a compensation control is set up with the following conditions (same as above but soft stop):

 ![cp- employee7.jpg](https://trytrove.file.force.com/servlet/rtaImage?eid=ka0TV0000001gWf&feoid=00NUn00000C06g9&refid=0EMTV00000EnkT3)

Soft stop for all employees with a Compa Ratio less than 0.9 or greater than 1.1

The planner will have to submit a justification reason along with their proposed compensation change since the New Compa Ratio is below the threshold set of 0.9. They will see a dialog that explains each reason that is triggering the soft stop. This justification reason will be visible in the comment history for the employee for all other planners.

 ![Screenshot_2024-08-27_at_6_22_36 AM.jpg](https://trytrove.file.force.com/servlet/rtaImage?eid=ka0TV0000001gWf&feoid=00NUn00000C06g9&refid=0EMTV00000EnkWH)

If a planner tries to bulk save/review then they will see each employee and each reason that requires justification and they will be blocked from the bulk save until these conditions are resolved. They can then quickly find these employees and resolve them.

 ![cp- employee9.jpg](https://trytrove.file.force.com/servlet/rtaImage?eid=ka0TV0000001gWf&feoid=00NUn00000C06g9&refid=0EMTV00000EnkXt)

**If hard stops and soft stops are triggered at the same time, the hard stop will take precedence.**

 

## Reviewing Soft Stops

If a previous planner saves a change that triggers a soft stop, a planner later in the approval chain can easily review that.

First, they can filter for these employees by filtering by the relevant employee group.

 ![Screenshot_2024-08-27_at_5_58_56 AM.jpg](https://trytrove.file.force.com/servlet/rtaImage?eid=ka0TV0000001gWf&feoid=00NUn00000C06g9&refid=0EMTV00000Enjta)

Then, if you click into the history of the employee, you can see the specific justification that the previous planner gave.

 ![Screenshot_2024-08-27_at_6_25_57 AM.jpg](https://trytrove.file.force.com/servlet/rtaImage?eid=ka0TV0000001gWf&feoid=00NUn00000C06g9&refid=0EMTV00000EnkZV)

##  

## FAQs

***What happens if I change compensation controls during an active cycle?***

For now, **compensation controls are only enforced client side**, **which means that all planners will need to refresh their pages to have the updated rules apply**. We highly recommend avoiding changes to employee groups with compensation controls during an active cycle.

Note: you can always audit employees later in the process by using the employee group filters.

 

***If a planner triggers a soft stop earlier in the approval chain and submits a justification reason for an employee, will a planner later in the chain also have to submit a justification reason when reviewing that employee?***

A planner will only need to submit a separate justification reason if they change a field related to the compensation control. **For example, if a compensation control is set up based on the salary increase amount, a planner late in the chain will only need to submit a justification reason if they change the salary increase amount.** If they only change other fields, they will not trigger the justification reason.

 

***If a planner triggers a soft stop when reviewing an employee and submits a justification reason, then makes a new change and reviews again, will they have to submit a justification reason again?***

They will only have to submit a justification reason again if they are changing a field related to the compensation control. If they are changing other, unrelated fields, they will not trigger the justification reason.

 

***What happens if multiple stops are triggered at the same time for an employee?***

If multiple soft stops are triggered, each of those soft stop reasons will show up in the modal. If a hard stop and a soft stop are triggered together, only the hard stop will show up in the modal until that is resolved.

Compensation Controls

Configurations overview

Cycle access permissions

Overview

Employee eligibility

Approval chains

Planning windows

Budgets

Recommendation logic

Adding non-integration data to your cycle

Reward letters

Cycle Setup

Columns

OTE planning

Writing formulas with Handlebars

Hourly and monthly pay

Columns and Formulas

Using the planner worksheet

Using the employee detail view

Cycle Progress dashboard

Budgets dashboard

Cycle Outcomes dashboard

Approval Statuses 

Worksheet Experience

Overview of smart features in compensation planning

Peer Comparison

Smart Flags

Priority Sort

Compensation Outliers

Manager Compression Flag

Vesting Drop Flag

Flags and Insights

Compensation Cycle Data Upload

First-Class Columns

Compensation Planning

Market Data Connections Overview

Market Data Connections Set up

Integrations 101

Integrations

Team View Overview

Team View Column Configuration

Team View Customizations

Re-ordering Columns

Deleting Columns

Adding Columns

Team View Settings

Team View

How much does Pave Market Data access cost?

How does Pave Work?

Intro to Pave

Contact Us

Pave 101

Total Compensation

Compensation 101

ISO Tax Implications

The Basics of Stock Options

The Confusing AMT (Alternative Minimum Tax)

ISO Strategies

An Overview of How Stock Options Work

The Stock Option Lifecycle

Equity 101

Login Troubleshooting and FAQ

How does company size affect which department, job family and job level I should choose?

How does Pave determine a role level and role family?

Troubleshooting Rippling Zero Records Error

What Market Data Connections does Pave currently support?

Account Creation Troubleshooting and FAQs

How to Benchmark Executive Compensation

FAQs

Creating an Account

How to add a colleague to Pave’s Market Data Platform

Market Data Role Management

Why does it matter to get levels and role families right?

SSO Configuration Guide

Logging In

Custom Role Creation Guide

Account Setup

Getting Started

Grades

Setting up Company Job Architecture

Company Job Architecture

Job Architecture 101

Pay Zone Manager

Step 1: Build Foundation

Generate Bands from Market Data

Editing Bands

Calculated Columns

Bands Set Audit Log

Bulk & Manually Associate Market Data to Bands

Employee Distribution in Bands

How to duplicate band sets

Managing & Reordering Calculated Columns

Unmatched Employees

View changes

Pay Types: Calculated TDC, Annual Equity, and Refresh Equity

Manually Create New Band Sets

Band Sets

Upload/Download Bands

Step 3: Update Ranges

Advanced Filters

Compare Bands

Generate Bands for New Jobs in Your Job Architecture

Relative Permissions

Ongoing Management & Analysis

Edit and apply benchmarks

Set weights and logic

Map data sources to jobs

Supported survey providers

Manage Pave data sources

Manage survey data sources

Benchmarks overview

Survey aging

Step 2: Benchmarking

Market Pricing

Notifications

Multirole Permissions

Standard Pave Permissions

Role Management

Impersonation as a Pave Admin

Auto-manager Assignment

Admin Notification Dashboard

General

How do I know if I’m impersonating someone else?

Can I act on another’s behalf while impersonating them?

Who is able to impersonate?

Who can I impersonate?

How do I impersonate a user?

What is Impersonation?

How can I view Pave as another role?

How do I add multiple users to a role at once?

How can I change the permission settings for a role?

How can I create a new role?

Can a user have more than one role at a time?

Am I able to change another user’s permissions or login credentials while impersonating?

Can I impersonate another user in one page while having other Pave tabs open?

Permissions & Settings FAQs

Account & Permissions

How to Search for a Benchmark

Pave Data and Methodology Guide

Market Data 101

Job Families

Calculated Benchmarks

Compensation Types

Data Collection and Aggregation

Percentiles

Filters

Consistency Labels

Pave's Data

Calculated Benchmarks FAQ

Location and Global Data FAQs

Equity Practices FAQs

Consistency Labels FAQ

Market Data FAQs

Job Levels

Global Location Insights

Advanced Equity

Market Data Pro

Market Data

Understanding Equity in Total Rewards

Display Original Grant Value

Compensation Simulator Configurations

Compensation Simulator Overview

Learning Hub Configuration

Learning Hub Overview

Reward Letters

Accessing your Total Rewards portal

Total Rewards 101

Visual Offer Letters with Workday

Visual Offer Letters with Greenhouse

Visual Offer Letters with Lever

Visual Offer Letter as a Candidate

Previewing Visual Offer Letters

Visual Offer Letters with Ashby

Creating and sending Visual Offer Letters in Pave

Visual Offer Letter 101

Why is my equity different in the equity tab on the left hand side compared to the equity valuation on the graphs?

Why can't I view my own Total Rewards portal?

Total Rewards and Visual Offer Letter FAQ

How can I complete our Greenhouse connection if "API credential management" is not in my Greenhouse menu?

Compensation Controls

Share

Share

Compensation Controls

Share

Share