## When to use cycle snapshots

When a compensation cycle opens, Pave takes a snapshot of your HRIS and equity management system (EMS) data and freezes it. This gives planners a stable baseline to work from. Changes can happen during a cycle: people relocate, job profiles change, org structures shift, exchange rates get updated.

With cycle snapshots, admins can selectively update integration data during an active cycle. You can snapshot specific fields for specific employees, update management chains across your organization, or run a full snapshot of all data. Snapshots can be reverted if something doesn't look right. Only admins can trigger snapshots, and there is no way to schedule recurring snapshots. If a planner notices incorrect data, they need to tell an admin.

A cycle snapshot pulls the latest data from your HRIS/EMS integration into your cycle. It is not a way to override or manually edit integration data. Your HRIS remains the single source of truth. If the data in your HRIS is wrong, fix it there first, then take a new snapshot. Snapshots pull from integration data that Pave already has, not directly from your HRIS at the moment you select Snapshot. Pave syncs with your HRIS approximately every hour, so recent HRIS changes may not be available immediately.

## Before you start

**Permissions required.** You need both of the following Compensation Planning permissions:

* Cycle configuration: edit

* Snapshot: edit

**Cycle must be frozen.** You can only snapshot data when the cycle's snapshot is frozen (the cycle is active). If the cycle is still in setup and the snapshot hasn't been frozen yet, automated snapshots are still running on a schedule and will pull in updates automatically.

**One snapshot at a time.** You cannot start a new snapshot while another snapshot or revert is in progress. The Snapshot button will show "Snapshotting…" or "Reverting…" and will be disabled until the current operation finishes.

## Types of snapshot

There are three ways to snapshot cycle data:

| Type                          | What it does                                                                               | When to use it                                                                                                 |
| ----------------------------- | ------------------------------------------------------------------------------------------ | -------------------------------------------------------------------------------------------------------------- |
| Full snapshot                 | Snapshots all HRIS and EMS data for every employee in the cycle                            | You need a complete data update, similar to what happens automatically before the cycle is frozen              |
| Management chain snapshot     | Updates management chains, direct manager email, and direct manager name for all employees | An org restructure or manager change happened and you need reporting lines corrected across the board          |
| Specific employees and fields | Snapshots selected fields for selected employees                                           | A few employees had job changes, relocations, or compensation updates and you want to update only what changed |

Partial snapshots (management chains and specific employees/fields) do not include equity data (grants, vesting events, exercise events). If you need to update equity data mid-cycle, use a full snapshot.

## Run a full snapshot

1. Go to your cycle's **General** configuration page.
2. In the **Cycle integration data** section, select **Snapshot**.
3. In the drawer, select **Full snapshot**.

![image.png](https://brainfish-storage-prod.s3-accelerate.amazonaws.com/uploads/64992f06-1653-4488-8b15-3d2c2f0a2eb1/c75e1e77-230c-4a14-8950-b56f616565e7/image.png?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Content-Sha256=UNSIGNED-PAYLOAD&X-Amz-Credential=ASIAUPPN5IL3QFFJFZVC%2F20260529%2Fus-east-2%2Fs3%2Faws4_request&X-Amz-Date=20260529T191058Z&X-Amz-Expires=3000&X-Amz-Security-Token=IQoJb3JpZ2luX2VjEP3%2F%2F%2F%2F%2F%2F%2F%2F%2F%2FwEaCXVzLWVhc3QtMiJHMEUCIGqaBQY%2BJlhHhWNFj2chYoiILAkvuRaVi8PbcT%2FVWyDxAiEA%2F61HFHnaiVFrDJh34P3Pd9Vkr3d6G1QSwC41MtrQTV0q5gUIx%2F%2F%2F%2F%2F%2F%2F%2F%2F%2F%2FARACGgwzMDgxMjU5NzUyODciDGP6HOldhanY3CtkDyq6Bd7oDYf5Nd0yWCG%2B%2FOV17liZX39kCGDe6N76wQ7sU7yaCQEk7I6uYTvKNd8zdDbBsIxY7CYDHMxLD3M2o75ZSi9%2BUDQK3bk6ZMYdWwOt1ZMARzOEnkjgQaoc62Qu1VYFt9b7ckgbZxe3ygIe7XacDyWLgZT1noJILbdSSkg48zLBrPISEirg9iAsx7TFsXkYKCw73riCVC0cFhF35Z29Skc1K6HpHjKl41FXNTR%2FdODhUUqk6umabb%2BDcsqWv4EhfwN4Pi3RHMrSJ98N5HGzoz6kb9Ioyp25Me4cG%2ByVmvnezYtMeWnyBpHDGRZNcS4XLjS9S1WTFWSDSvYeJ%2BAkMIXA7ExGiI7mI0UpotO9%2B3gsZHWpfq6XO2NXAbs5IIWbtHNVmm8CNb%2FK9aVHasrunFBf8SRbCYerydsR15cNvFXlcEn5GPOv%2FB%2BPsnACPZBduZ%2FOVySZSmc2EkQTdvMD3FbmLP%2F4Iv5p%2BPU%2BgTA4fhghsDEoKWbFVLru74zqKtE4UPRNZFsuKsfCxRANsHaHaJwPL23Ee4Ddi%2B0%2BklScyxoUr4Zks7fkoN1Bk%2FQkz5HJcmzUEvPyKc3YF5DlVke6zF4QsLG%2BVQjlp4iasQFBWNGHTIGr29Bdt6XEgsPzio9OTor1lysFgF4SDUCRnYJumohIb3hX7SpZtDWvWpDti8Zu7u3dRoeLQT28kdtYznZS0zlBA7mNBqIf%2FnoH8ZMlkaRt71ldyVpIJ5Ok6hUg6pYxwq4mQ7Rh92DtrExPiQs5K0v2EnHwvU5um1KV1Ed0B1UAZMNTIjyQiIL5WF%2BILbz%2BUxA1rUFG%2BOY2Ro383uUVTxj4aeXfkX7OQM5mC4rXGK2sCCxMwQGeBJDj7RBvFijnGlauBOpEeRzElY4vrMXygBMlmFTsIwfYDLLBtytRz9eMTdxOA54%2BveA2MNan5tAGOpABwzRHX%2B9FUivgdewshIZuzleKvXZhLY3d2IUV3WsvmXyQBzQ5eABsNlyNi3DewOiXPjoVMcRN1DiT8ZsfQjJN92fbRgaKRDO4tpn%2ByhBAdy%2BQe1BcjKLpIiFPAK2pyv3wEwGtmntamRmfAZw50wCNQxETeTCQj3P9IOPWDhDxfRhqviraby%2BBGa5fuJgE4J3n&X-Amz-Signature=61d9e09ae69ab57f906084e5b91c8893179eb40c18c479c9fc5cac9a3acb0985&X-Amz-SignedHeaders=host&response-content-disposition=attachment&x-amz-checksum-mode=ENABLED&x-id=GetObject "=x1195")

1. Select **Snapshot**.
2. In the confirmation modal, select **Confirm snapshot**.

A full snapshot replaces all underlying integration data in your cycle, including both HRIS and EMS data. You will receive an in-app notification when the snapshot completes.

## Run a management chain snapshot

1. Go to your cycle's **General** configuration page.
2. In the **Cycle integration data** section, select **Snapshot**.
3. In the drawer, select **Partial snapshot**.
4. Under "What subset of your HRIS data do you want to update?", select **Update management chains for all employees**.
5. Select **Snapshot**.
6. In the confirmation modal, select **Confirm snapshot**.

This updates three fields for every employee in the cycle: management chain, direct manager email, and direct manager name. This is useful after org restructures or terminations that change reporting lines.

Management chain updates affect which employees a planner can see in their worksheet. If a planner's access is scoped by direct reports or reporting chain (via the bypass approvals permission), taking a management chain snapshot will immediately change who appears in their view.

## Snapshot specific employees and fields

Use this option when you need to update particular data for particular people, for example, updating job titles for employees who were recently promoted, or snapshotting compensation data after a mid-cycle adjustment in your HRIS.

### Select employees and fields

1. Go to your cycle's **General** configuration page.
2. In the **Cycle integration data** section, select **Snapshot**.
3. In the drawer, select **Partial snapshot**.
4. Under "What subset of your HRIS data do you want to update?", select **Update specific employees and fields**.
5. Select **Next**.

### Create snapshot groups

A snapshot group defines which employees should have which fields snapshotted. You can create multiple groups if different employees need different fields updated.

1. In the **Select employees** field, search for and select employees. You can also select **All employees** to include everyone in the cycle.

   * To add employees in bulk, select **Upload a CSV**. The CSV should contain employee emails listed in one column without a header. All emails must match employees in the cycle. If any emails are unrecognized, you will need to correct and re-upload the file.
2. In the **Select fields** area, choose which HRIS fields to snapshot. Fields are organized into two categories:

   * **Employee fields**: first name, last name, gender, ethnicity

   * **Job fields**: title, department, division, city, country, level, metro, job code, family, start date, paid hourly, location state, job meta

   * Use **Select all** to include all fields in a category.

![image.png](https://brainfish-storage-prod.s3-accelerate.amazonaws.com/uploads/64992f06-1653-4488-8b15-3d2c2f0a2eb1/fe4c412c-17b4-48a3-a854-f0ee67199feb/image.png?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Content-Sha256=UNSIGNED-PAYLOAD&X-Amz-Credential=ASIAUPPN5IL3QFFJFZVC%2F20260529%2Fus-east-2%2Fs3%2Faws4_request&X-Amz-Date=20260529T191058Z&X-Amz-Expires=3000&X-Amz-Security-Token=IQoJb3JpZ2luX2VjEP3%2F%2F%2F%2F%2F%2F%2F%2F%2F%2FwEaCXVzLWVhc3QtMiJHMEUCIGqaBQY%2BJlhHhWNFj2chYoiILAkvuRaVi8PbcT%2FVWyDxAiEA%2F61HFHnaiVFrDJh34P3Pd9Vkr3d6G1QSwC41MtrQTV0q5gUIx%2F%2F%2F%2F%2F%2F%2F%2F%2F%2F%2FARACGgwzMDgxMjU5NzUyODciDGP6HOldhanY3CtkDyq6Bd7oDYf5Nd0yWCG%2B%2FOV17liZX39kCGDe6N76wQ7sU7yaCQEk7I6uYTvKNd8zdDbBsIxY7CYDHMxLD3M2o75ZSi9%2BUDQK3bk6ZMYdWwOt1ZMARzOEnkjgQaoc62Qu1VYFt9b7ckgbZxe3ygIe7XacDyWLgZT1noJILbdSSkg48zLBrPISEirg9iAsx7TFsXkYKCw73riCVC0cFhF35Z29Skc1K6HpHjKl41FXNTR%2FdODhUUqk6umabb%2BDcsqWv4EhfwN4Pi3RHMrSJ98N5HGzoz6kb9Ioyp25Me4cG%2ByVmvnezYtMeWnyBpHDGRZNcS4XLjS9S1WTFWSDSvYeJ%2BAkMIXA7ExGiI7mI0UpotO9%2B3gsZHWpfq6XO2NXAbs5IIWbtHNVmm8CNb%2FK9aVHasrunFBf8SRbCYerydsR15cNvFXlcEn5GPOv%2FB%2BPsnACPZBduZ%2FOVySZSmc2EkQTdvMD3FbmLP%2F4Iv5p%2BPU%2BgTA4fhghsDEoKWbFVLru74zqKtE4UPRNZFsuKsfCxRANsHaHaJwPL23Ee4Ddi%2B0%2BklScyxoUr4Zks7fkoN1Bk%2FQkz5HJcmzUEvPyKc3YF5DlVke6zF4QsLG%2BVQjlp4iasQFBWNGHTIGr29Bdt6XEgsPzio9OTor1lysFgF4SDUCRnYJumohIb3hX7SpZtDWvWpDti8Zu7u3dRoeLQT28kdtYznZS0zlBA7mNBqIf%2FnoH8ZMlkaRt71ldyVpIJ5Ok6hUg6pYxwq4mQ7Rh92DtrExPiQs5K0v2EnHwvU5um1KV1Ed0B1UAZMNTIjyQiIL5WF%2BILbz%2BUxA1rUFG%2BOY2Ro383uUVTxj4aeXfkX7OQM5mC4rXGK2sCCxMwQGeBJDj7RBvFijnGlauBOpEeRzElY4vrMXygBMlmFTsIwfYDLLBtytRz9eMTdxOA54%2BveA2MNan5tAGOpABwzRHX%2B9FUivgdewshIZuzleKvXZhLY3d2IUV3WsvmXyQBzQ5eABsNlyNi3DewOiXPjoVMcRN1DiT8ZsfQjJN92fbRgaKRDO4tpn%2ByhBAdy%2BQe1BcjKLpIiFPAK2pyv3wEwGtmntamRmfAZw50wCNQxETeTCQj3P9IOPWDhDxfRhqviraby%2BBGa5fuJgE4J3n&X-Amz-Signature=cdce8605716a97540307a0b4000a89ba0d8b3a7116b9217f57e4b7285950e9d6&X-Amz-SignedHeaders=host&response-content-disposition=attachment&x-amz-checksum-mode=ENABLED&x-id=GetObject "=1312x1924")

1. Optionally, check **Update compensation fields** to include base pay, variable pay, and bonus data. Compensation is snapshotted as a complete replacement (all compensation records for the selected employees are updated at once).
2. Select **Save** to save the group.

To create additional groups, select **+ New snapshot group** and repeat the process. Each employee can only appear in one group. If you try to add an employee who is already in another group, you will see an error listing the duplicates and which group they belong to.

1. When all groups are configured, select **Snapshot**.
2. In the confirmation modal, review the number of employees affected, then select **Confirm snapshot**.

You will receive an in-app notification when the snapshot completes.

## What happens after a snapshot

When you snapshot cycle data, several things update automatically:

* **Column values recalculate.** Any columns that depend on the snapshotted data (including custom columns built with formulas) will update for the affected employees.

* **Band matching re-runs.** Employees whose job data changed will be re-matched to pay bands.

* **Recommendations recalculate.** If recommendation logic references snapshotted fields, new recommendations will be generated for affected employees.

* **Smart Flags recalculate.** Flags and priority scores are re-evaluated for affected employees.

Things that do **not** update automatically:

* **Approval chains** are not regenerated. If a management chain change affects who should approve what, you need to [regenerate approval chains](https://support.pave.com/en-us/articles/approval-chains-RPnVJR22kQ) separately.

* **Budgets** are not recalculated. Budget allocations remain as configured.

* **User inputs are never overwritten.** If a planner has already entered a value in a column (a recommendation, a note, an override), that value is preserved. A snapshot will never replace something a planner typed in.

* **Employee roster is unchanged.** A snapshot does not add or remove employees from the cycle. If someone was terminated after the cycle started, they remain in the cycle.

## Revert a snapshot

There is no way to preview what data will change before taking a snapshot. If the result isn't what you expected, you can revert it. Reverting restores cycle data to the state it was in before the snapshot.

1. Go to your cycle's **General** configuration page.
2. In the **Cycle integration data** section, select **View history**.
3. In the snapshot history drawer, select **Revert latest**.

![image.png](https://brainfish-storage-prod.s3-accelerate.amazonaws.com/uploads/64992f06-1653-4488-8b15-3d2c2f0a2eb1/d0e6241b-3730-42ac-ad54-6553c196035e/image.png?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Content-Sha256=UNSIGNED-PAYLOAD&X-Amz-Credential=ASIAUPPN5IL3QFFJFZVC%2F20260529%2Fus-east-2%2Fs3%2Faws4_request&X-Amz-Date=20260529T191058Z&X-Amz-Expires=3000&X-Amz-Security-Token=IQoJb3JpZ2luX2VjEP3%2F%2F%2F%2F%2F%2F%2F%2F%2F%2FwEaCXVzLWVhc3QtMiJHMEUCIGqaBQY%2BJlhHhWNFj2chYoiILAkvuRaVi8PbcT%2FVWyDxAiEA%2F61HFHnaiVFrDJh34P3Pd9Vkr3d6G1QSwC41MtrQTV0q5gUIx%2F%2F%2F%2F%2F%2F%2F%2F%2F%2F%2FARACGgwzMDgxMjU5NzUyODciDGP6HOldhanY3CtkDyq6Bd7oDYf5Nd0yWCG%2B%2FOV17liZX39kCGDe6N76wQ7sU7yaCQEk7I6uYTvKNd8zdDbBsIxY7CYDHMxLD3M2o75ZSi9%2BUDQK3bk6ZMYdWwOt1ZMARzOEnkjgQaoc62Qu1VYFt9b7ckgbZxe3ygIe7XacDyWLgZT1noJILbdSSkg48zLBrPISEirg9iAsx7TFsXkYKCw73riCVC0cFhF35Z29Skc1K6HpHjKl41FXNTR%2FdODhUUqk6umabb%2BDcsqWv4EhfwN4Pi3RHMrSJ98N5HGzoz6kb9Ioyp25Me4cG%2ByVmvnezYtMeWnyBpHDGRZNcS4XLjS9S1WTFWSDSvYeJ%2BAkMIXA7ExGiI7mI0UpotO9%2B3gsZHWpfq6XO2NXAbs5IIWbtHNVmm8CNb%2FK9aVHasrunFBf8SRbCYerydsR15cNvFXlcEn5GPOv%2FB%2BPsnACPZBduZ%2FOVySZSmc2EkQTdvMD3FbmLP%2F4Iv5p%2BPU%2BgTA4fhghsDEoKWbFVLru74zqKtE4UPRNZFsuKsfCxRANsHaHaJwPL23Ee4Ddi%2B0%2BklScyxoUr4Zks7fkoN1Bk%2FQkz5HJcmzUEvPyKc3YF5DlVke6zF4QsLG%2BVQjlp4iasQFBWNGHTIGr29Bdt6XEgsPzio9OTor1lysFgF4SDUCRnYJumohIb3hX7SpZtDWvWpDti8Zu7u3dRoeLQT28kdtYznZS0zlBA7mNBqIf%2FnoH8ZMlkaRt71ldyVpIJ5Ok6hUg6pYxwq4mQ7Rh92DtrExPiQs5K0v2EnHwvU5um1KV1Ed0B1UAZMNTIjyQiIL5WF%2BILbz%2BUxA1rUFG%2BOY2Ro383uUVTxj4aeXfkX7OQM5mC4rXGK2sCCxMwQGeBJDj7RBvFijnGlauBOpEeRzElY4vrMXygBMlmFTsIwfYDLLBtytRz9eMTdxOA54%2BveA2MNan5tAGOpABwzRHX%2B9FUivgdewshIZuzleKvXZhLY3d2IUV3WsvmXyQBzQ5eABsNlyNi3DewOiXPjoVMcRN1DiT8ZsfQjJN92fbRgaKRDO4tpn%2ByhBAdy%2BQe1BcjKLpIiFPAK2pyv3wEwGtmntamRmfAZw50wCNQxETeTCQj3P9IOPWDhDxfRhqviraby%2BBGa5fuJgE4J3n&X-Amz-Signature=4df1bba7f371cbd3b238fdb9ad684bb5e2414112354e9b042ad755379eaee7cb&X-Amz-SignedHeaders=host&response-content-disposition=attachment&x-amz-checksum-mode=ENABLED&x-id=GetObject "=1376x1914")

1. Review the details (who performed the snapshot, when it happened, how many employees were affected).
2. Select **Revert**.

After a revert, column values and band matching will recalculate to reflect the restored data.

**Revert limitations:**

* You can only revert the most recent snapshot. You cannot skip ahead and revert an older snapshot while keeping a newer one.

* Only manual snapshots (ones you triggered from the UI) can be reverted. Automated snapshots that ran before the cycle was frozen cannot be reverted.

* Pave retains up to 5 previous manual snapshots for revert purposes. After 5 manual snapshots, the oldest snapshot is permanently deleted.

* You cannot revert while another snapshot or revert is in progress.

## Snapshot history

Every snapshot and revert is logged in the snapshot history. To view it:

1. Go to your cycle's **General** configuration page.
2. In the **Cycle integration data** section, select **View history**.

Each entry shows:

* Who performed the action (the admin's name)

* What happened ("snapshotted the cycle" or "reverted the latest snapshot")

* When it happened (date and time)

* Scope: "Full snapshot" for full snapshots, or the number of employees changed for partial snapshots

## FAQ

### How often can I snapshot data during a cycle?

As often as you need. There is no limit on the number of snapshots, though only the 5 most recent manual snapshots are retained for revert purposes.

### What if a planner is editing while I take a snapshot?

The snapshot will update the underlying data regardless. If the planner made changes to columns that depend on snapshotted data, their inputs are preserved (user inputs are never overwritten). However, calculated values like recommendations and band matching will recalculate, which may change what the planner sees. The planner does not receive a notification about the snapshot.

### Can I snapshot data for a finalized cycle?

No. The cycle must be active with a frozen snapshot. Once a cycle is finalized, data cannot be snapshotted.

### Why doesn't my snapshot show the latest HRIS data?

Pave syncs integration data from your HRIS approximately every hour. If you made a change in your HRIS less than an hour ago, it may not be reflected yet. Wait for the next sync cycle, then try again.

### What permissions do planners need to see snapshotted data?

Planners don't need any special permissions. Snapshotted data appears automatically in their worksheet the next time they load or refresh the page. If management chains were updated and a planner's access is scoped by reporting line, the employees visible to them may change.


Snapshot cycle data

Configurations overview

Cycle access permissions

Overview

Employee eligibility

Approval chains

Planning windows

Budgets

Recommendation logic

Adding non-integration data to your cycle

Reward letters

Cycle Setup

Columns

OTE planning

Writing formulas with Handlebars

Hourly and monthly pay

Columns and Formulas

Using the planner worksheet

Using the employee detail view

Cycle Progress dashboard

Budgets dashboard

Cycle Outcomes dashboard

Approval Statuses 

Worksheet Experience

Overview of smart features in compensation planning

Peer Comparison

Smart Flags

Priority Sort

Compensation Outliers

Manager Compression Flag

Vesting Drop Flag

Flags and Insights

Compensation Planning

Connect ADP

Connect BambooHR

Connect Dayforce

Connect Deel

Connect Gusto

Connect HiBob

Connect Workday

Connect Namely

Connect Paylocity

Connect Personio

Connect Rippling

Connect UKG Pro

Connect CharlieHR

Connect Humaans

Connect Justworks

Connect Sapling

Connect SAP SuccessFactors

Connect TriNet

Connect Zenefits

HRIS Integrations

Connect Carta

Connect ComputerShare

Connect Shareworks

Connect E*Trade

Connect Fidelity

Connect Global Shares

Connect Pulley

Connect Schwab

Connect Ledgy

EMS integrations

Connect Culture Amp

Connect Workday Performance

Performance integrations

Connect Ashby

Connect Greenhouse

Connect Lever

Connect Workday ATS

ATS integrations

Manage your connections

Upload custom reports (historical pay, benefits, and original grant value)

Pave API

Integrations

Configure Team View

Team View

Grades

Setting up Company Job Architecture

Company Job Architecture

Job Architecture 101

Pay Zone Manager

Step 1: Build Foundation

Generate Bands from Market Data

Editing Bands

Calculated Columns

Bands Set Audit Log

Bulk & Manually Associate Market Data to Bands

Employee Distribution in Bands

How to duplicate band sets

Managing & Reordering Calculated Columns

Unmatched Employees

View changes

Pay Types: Calculated TDC, Annual Equity, and Refresh Equity

Manually Create New Band Sets

Band Sets

Upload/Download Bands

Step 3: Update Ranges

Advanced Filters

Compare Bands

Generate Bands for New Jobs in Your Job Architecture

Relative Permissions

Ongoing Management & Analysis

Edit and apply benchmarks

Set weights and logic

Map data sources to jobs

Supported survey providers

Manage Pave data sources

Manage survey data sources

Benchmarks overview

Survey aging

Step 2: Benchmarking

Market Pricing

Create an account and log in

Set up single sign-on (SSO)

Account setup

Configure role permissions

Create and manage roles

Roles and permissions

Impersonate a user

Manage notifications

Complete your company profile

Manage company settings

Platform settings

Account & Permissions

Create and manage Peer Groups in Market Data

Create and manage Market Data reports

Equity data benchmarking

Explore data composition

Explore the Pave job catalog

Filter Market Data benchmarks

Get started with Market Data

Share Market Data externally

Market Data Benchmarks (Features & Workflows)

Understand Calculated Benchmarks

Understand Consistency Labels

Understand job matching

Understand Market Data methodology

Understand Job Levels

Market Data Methodology 

Explore Global Location Insights

Explore Equity Practices

Other Pave Market Data Products 

Market Data FAQ

FAQ's

Upgrade to Market Data Pro

Upgrades & Pricing 

Market Data

Customize branding in Total Rewards and Visual Offer Letter

Branding and customization

Configure benefits

Configure equity settings

Customize compensation display

Equity slider and valuation options

Compensation configuration

Future modeling overview

Configure future grant modeling

Configure compensation simulator

Future modeling

Set up Learning Hub content

Learning Hub

Total Rewards & Visual Offer Letter

Security at Pave

Security General Information

 Do you provide encrypted data storage of at least 256 AES?

Does Pave provide activity logs if requested? 

Will Pave connect a customer's data to any other systems?

Does Pave have a data retention policy? How long will the customer's data be kept in Pave's system?

What is Pave's threat detection strategy?

How do customers receive security alerts and/or security advisories?

Is Pave GDPR compliant?

What specific data is shared with Pave?

Can I please have your SOC 2 report?

Can people see our company name if we complete our integrations or is that also de-identified?

Can we complete the integration without sharing PII like employee name and email? 

How can I access Pave's DPA?

Are your data transmissions encrypted with at least TLS 1.2?

Security FAQs

Security

Guide

Pave

<p>Search for answers or submit a support ticket, right from the search bar.</p>